The passenger vehicle brake caliper durability test bench can conduct tests, development and verification of the brake caliper assembly in a laboratory environment. It is used to evaluate the durability of the passenger vehicle brake caliper assembly, and the test scope covers (as stipulated in CB/T 15089 for M1 category vehicles).
Through the hydraulic loading system configured on the test bench or the CAN communication module, the brake caliper is made to generate braking force. By simulating the environmental temperature and humidity in the high and low temperature chambers, the working process of the brake caliper can be simulated according to relevant standards, and a cyclic durability test can be conducted on it.
Main test contents| Hydraulic/EPB Brake Caliper | ||
| Serial Number | Test Name | Test content |
| 1 | High-pressure durability | During the durability test under high pressure, no deformation or damage that affects the functionality of the components should occur. |
| 2 | Work durability | Durability tests are conducted under the rated pressure/setting pressure. Minor wear on the piston, sealing ring and inner wall of the cylinder bore is allowed, as long as it does not affect functionality; no damage that affects performance is permitted. |
| 3 | Vibration durability | The brake caliper assembly is subjected to a durability test on a vibration table under the target pressure. The assembly should not have any damage that affects its functional use, such as cracks, parts detachment or fractures. The decrease in tightening torque for threaded parts should not exceed 30% of the specified torque limit in the product technical documentation. During the entire test, there should be no leakage of brake fluid. |
| 4 | Parking durability | MGU/MGU+ Target Hydraulic Durability Test |
| EMB Brake Caliper | ||
| Serial Number | Test Name | Test content |
| 1 | Overall durability | Carried out the durability test according to the preset procedures. After the test, the function was normal, with no obvious surface cracks or deformations that affected the functionality. |
| 2 | Parking durability | Carried out the durability test by performing the preset parking action. After the test, the function was normal, with no obvious surface cracks or deformations that affected the functionality. |
| 3 | Vibration durability | Place the product according to the specified operation on the vibration table for the durability test. No damage, cracking, detachment of parts, or breakage that affects the performance of use is allowed. |
Product featuresIt adopts an independently developed closed-loop controller, which has complete independent intellectual property rights and can achieve the pressure, force and current control as stipulated by various industry standards.
Ethernet bus control ensures the real-time nature of data transmission and the reliability of equipment operation.
It has complete safety protection and safety interlock functions, as well as comprehensive fault alarm capabilities, ensuring safe operation.
The required components require minimal maintenance and are highly reliable.
Using the independently developed fully-featured Chinese control and measurement software - the Brake Key Components and Assembly Test System Software V1.0, it features intelligent human-computer interaction and flexible test execution capabilities.
Using the MS-Excel automatic reporting tool, automatically conduct data traversal, analysis, and generate customized test reports.
By adopting advanced database management and interval storage strategies, it supports data replay, historical query, and automatic data saving under power failure protection, enabling massive data management throughout the product's entire life cycle.
Technical Specifications| Hydraulic main parameters | ||
| Name | Specification | Precision |
| Load pressure | 1~21MPa | ±0.1MPa |
| Loading frequency | 1200 times per hour | / |
| Environmental chamber | -40~150℃ 10~98%RH |
/ |
| Vibration table | 150m/s2、40Hz | / |
| Main parameters of EPB | ||
| Name | Specification | Precision |
| Adjustable power supply | 50V/60A | / |
| Voltage sensor | 0~50V | ±0.2%FS |
| Current sensor | 0~100A | ±0.1%FS |
| Clamping force measurement | 0~60kN | ±0.5%FS |
| Main parameters of EMB | ||
| Name | Specification | Precision |
| Adjustable power supply | 80V / 200A / 5kW (Bidirectional) | / |
| Voltage sensor | 0~100V | ±0.2%FS |
| Current sensor | 0~200A | ±0.1%FS |
| Clamping force measurement | 0~90kN | ±0.5%FS |
| Environmental chamber | -40~150℃ 10~98%RH |
/ |
| Vibration table | GB/2423.56 Random Test 150m/s2、40Hz sine wave test |
/ |
Applicable standards