1. The "Innovative Design for Self-Balancing of Hub Center Bending Moment" employs two sets of side balancing hydraulic cylinders and loads on the blade sides to counteract each other in opposite directions, achieving the balance of the hub center bending moment. This significantly reduces the forces on the foundation and fixtures, and decreases the construction cost and structural dimensions.
2. "Multi-point Collaborative Servo Loading" - Four sets of static pressure support loading cylinders load simultaneously, accurately simulating the actual load distribution of the fan. A multi-stage pulley system is used for amplification, with a maximum amplification factor of 2 times the stroke. It perfectly adapts to the maximum swaying and oscillation deformation of the blades, with sufficient stroke margin. The loading point position can be adjusted continuously along the ground track, enabling compatibility with different loading points and upgrades of subsequent models, and has strong versatility.
3. "Special long-term durability hydraulic oil source control" Silent oil source: 6 pumps are connected in parallel, with automatic flow regulation. It can operate continuously for 24 hours, with noise ≤ 75 dB and energy saving ≥ 60%. Temperature control is achieved, meeting the requirements of 8000-hour uninterrupted fatigue tests, and the cleanliness and temperature of the oil remain stable throughout the process.
4. "Four-layer distributed security collaborative control architecture" consists of the management layer, the main control layer, the bottom layer, and the equipment layer. The safety circuit is independent with the highest priority and complies with SIL3 safety level. It can monitor the load, temperature, vibration, and displacement in real time, and has two-level alarms + automatic shutdown + breakpoint retry, as well as fault record cycle data.
Technical innovation points
1."High test capability, fully compatible with 18.5mw" meets the total bending moment of 61517 kN·m and the total radial force of 1287.1 kN, covering HALT high acceleration fatigue, extreme load, and durability tests. It can complete an 8000-hour long-term fatigue test.
2. "High control accuracy, reliable test data" The rotational speed/torque is in a closed-loop stable state. Data sampling is ≥ 1kHz. Multi-channel synchronous acquisition is supported. It supports automatic report generation, curve analysis, and data export.
3. "Stable and reliable operation, low maintenance cost": Redundant design includes backup pumps, dual-loop cooling, power failure protection, etc. Fault self-diagnosis + remote maintenance to reduce the risk of downtime and operational costs.
4. "High versatility and strong scalability" - The track system and other components uniformly store and manage the parameters of the hydraulic cylinders, enabling the upgrade and transformation of subsequent higher-power models. The software has open interfaces, allowing for customized development and design.